VDO Druksensor 0-25 Bar - M18
search
  • VDO Druksensor 0-25 Bar - M18
  • VDO Druksensor 0-25 Bar - M18
  • VDO Druksensor 0-25 Bar - M18

VDO Druksensor 0-25 Bar - M18

€ 197,97 (incl. btw)

€ 163,61 excl. btw.

Part-number:
VDO 360-081-053-003C
  • Pressure range: 0 to 25 Bar
  • Thread: M18 x 1.5
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 1-pole common ground
  • Warning contact: 5.50 Bar ± 0.5 Bar:
Logistical information:
BestelbaarClick here for detailed information.
  • HS Code: 90269000
  • Ean Code: 410359069146
  • Weight: 0.17kg
Aantal

Description transmission oil pressure sender:

VDO 360 081 053 003C Full technical specifications:

Mechanical features:

Pressure measuring range:0 - 25 Bar
0 - 362 PSI
0 - 2500 KPa
Maximum pressure:50 Bar during 2 seconds
Thread:M18 x 1.5
Length thread + nut (L1):20.5 mm
Thread length (L2):12 mm
Torque:100 Nm
Operating temperature:-25 °C to +100 °C
Pressure medium:Oil - Fuel - Air

Electrical features:

Operating voltage:6 - 24 V DC
Resistor range:10 - 184 Ohm
Pressure sensor signal:Single-Pole common ground
Warning contact:5.50 Bar ± 0.5 Bar:
Warning contact switching capacity:Maximum 5 Watt non-inductive
Warning contact features:Closes with falling pressure
Pressure sender connector:M4 AMP Male 4.8 x 0.8 mm 90°
Warning contact connector:M4 AMP Male 6.3 x 0.8 mm 50°

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog:Page 123 - 125
Type of connection:E
VDO En Du Pressure senders Tables:VDO Datasheet table 6

Retail package:

  • VDO 360 081 053 003C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
VDO Continental I
360-081-053-003C

Datasheet

Categorie
Druksensoren
Analoog signaal
10 - 184 Ohm
Voedingsspanning
6 - 24 Volt DC
Artikel status - Levertijd
Bestelbaar
Verpakking
VDO Sensor retail verpakking
Functionaliteit
Transmissie oliedruk
Communicatie
Analoog
Uitgangsignaal
10 - 184 Ohm
Sensor signaal
Min aan massa
Sensor connector
M4 Vlakstekker 4.8 x 0.8 mm
Schroefdraad
M18 x 1.5 Male
Connector type
M4 Vlakstekker 4.8 x 0.8 mm
Waarschuwingscontact connector
Vlakstekker 6.3 x 0.8 mm
Druk meetbereik
0 - 25 Bar en 0 - 360 PSI