 
        
          
                    
                    
                  
                
               
        
           
           
           
           
          €57.31 tax excl.
Veratron A2C59514085
| Installation (Hole) diameter and Outside diameter: | 52 mm - 2 1/16 Inch and 59 mm - 2 1/3 Inch | 
| Installation depth: | 50 mm | 
| Locking height with Spinlock nut: | 0.5 mm - 20 mm | 
| Locking height with bracket: | 2 mm - 15 mm (Optional) | 
| Flushmount: | Optional kit A2C59510864 | 
| Fuel level measurement range: | E -1/2 - F | 
| Resistance empty: | 0 Ohm | 
| Resistance full: | 90 Ohm | 
| Sensor signal input fuel level gauge: | Veratron Lever arm sender 0 - 90 Ohm USA | 
| Accuracy: | < 3.6 angular degrees | 
| Connection: | Hirschmann 8 pins MQS connector | 
| Operating voltage: | 8 - 32 V DC | 
| Current consumption: | < 140 mA including warning LED | 
| Reverse polarity protection: | Yes - 5 Minutes | 
| Short circuit protection: | Yes - 1 Minute | 
| Deflection angle: | 90° | 
| Dial colour: | Black | 
| Dial Illumination: | Amber LED backlight 605nm | 
| Pointer: | White LED backlight | 
| Warning LED: | Red (632nm) | 
| Programming: | Veratron USB software kit | 
| Model: | Veratron ViewLine Marine | 
| Lens: | Dual - Anti-glare - Anti-Fog | 
| Standard bezel: | Round black (Interchangeable) | 
| Front protection class: | IP67 (IEC 60529) | 
| Rear protection class: | IP52 | 
| Relative humidity: | Maximum 95% | 
| Operating temperature: | -30°C to +80°C (Plastic bezel) | 
| CE standard: | Yes | 
| DNV GL Certification: | Yes | 
| Mechanical shock continuous: | 25G - 6ms - 1Hz | 
| Mechanical single shock: | 100G - 11ms | 
| Free fall test: | 1 Meter - 3x | 
| Housing flame retarding: | UL94-VD | 
Data sheet
Specific References