VDO Pressure sender 0-10 Bar - M10
search
  • VDO Pressure sender 0-10 Bar - M10
  • VDO Pressure sender 0-10 Bar - M10
  • VDO Pressure sender 0-10 Bar - M10

VDO Pressure sender 0-10 Bar - M10

€87.60 (tax incl.)

€72.40 tax excl.

Part-number:
VDO 360-081-030-031C
  • Pressure range: 0 to 10 Bar
  • Thread: M10 x 1 Conical short
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 1-pole common ground
  • Warning contact: 0.50 Bar ± 0.15 Bar
Logistical information:
OrderableClick here for detailed information.
  • HS Code: 90269000
  • Ean Code: 4103590949615
  • Weight: 0.11kg
Quantity

Description engine oil pressure sender:

VDO 360 081 030 031C Full technical specifications:

Mechanical features:

Pressure measuring range:0 - 10 Bar
0 - 145 PSI
0 - 1000 KPa
Maximum pressure:30 Bar during 2 seconds
Thread:M10 x 1 Tapered short
Length thread + nut (L1):19.5 mm
Thread length (L2):11 mm
Torque:30 Nm
Operating temperature:-25 °C to +100 °C
Pressure medium:Oil - Fuel - Air

Electrical features:

Operating voltage:6 - 24 V DC
Resistor range:10 - 184 Ohm
Pressure sensor signal:Single-Pole common ground
Warning contact:0.50 Bar ± 0.15 Bar
Warning contact switching capacity:Maximum 5 Watt non-inductive
Warning contact features:Closes with falling pressure
Pressure sender connector:M4 AMP Male 6.3 x 0.8 mm 50°
Warning contact connector:M4 AMP Male 6.3 x 0.8 mm 50°

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog:Page 123 - 125
Type of connection:B
VDO En Du Pressure senders Tables:VDO Datasheet table 4

Retail package:

  • VDO 360 081 030 031C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
VDO Continental I
360-081-030-031C

Data sheet

Category
Pressure senders
Analogue signal
10 - 184 Ohm
Operating voltage
6 - 24 Volt DC
Part status - Delivery time
Orderable
Packaging
VDO Sensor retail package
Functionality
Engine oil pressure
Communication
Analog
Signal output:
10 - 184 Ohm
Sensor signal
Common ground
Sensor connector
M4 AMP Male 6.3 x 0.8 mm
Thread
M10 x 1 Male tapered short
Warning contact
0.50 Bar - Normally closed
Connector type
M4 Vlakstekker 6.3 x 0.8 mm
Warning contact connector
M4 AMP Male 6.3 x 0.8 mm