VDO Pressure sender 0-5 Bar - M14
search
  • VDO Pressure sender 0-5 Bar - M14
  • VDO Pressure sender 0-5 Bar - M14
  • VDO Pressure sender 0-5 Bar - M14

VDO Pressure sender 0-5 Bar - M14

€93.97 (tax incl.)

€77.66 tax excl.

Part-number:
VDO 360-081-030-033C
  • Pressure range: 0 to 5 Bar
  • Thread: M14 x 1.5
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 1-pole common ground
  • Warning contact: 0.40 Bar ± 0.10 Bar
Logistical information:
  • HS Code: 90269000
  • Ean Code: 4103590300225
  • Weight: 0.14kg
Quantity

Description engine oil pressure sender:

VDO 360 081 030 033C Full technical specifications:

Mechanical features:

Pressure measuring range:0 - 5 Bar
0 - 72.5 PSI
0 - 500 KPa
Maximum pressure:30 Bar during 2 seconds
Thread:M14 x 1.5
Length thread + nut (L1):20.5 mm
Thread length (L2):12 mm
Torque:60 Nm
Operating temperature:-25 °C to +100 °C
Pressure medium:Oil - Fuel - Air

Electrical features:

Operating voltage:6 - 24 V DC
Resistor range:10 - 184 Ohm
Pressure sensor signal:Single-Pole common ground
Warning contact:0.40 Bar ± 0.10 Bar
Warning contact switching capacity:Maximum 5 Watt non-inductive
Warning contact features:Closes with falling pressure
Pressure sender connector:M4 Thread
Warning contact connector:M4 AMP Male 6.3 x 0.8 mm 50°

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog:Page 123 - 125
Type of connection:F
VDO En Du Pressure senders Tables:VDO Datasheet table 3

Retail package:

  • VDO 360 081 030 033C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
360-081-030-033C

Data sheet

Category
Pressure senders
Analogue signal
10 - 184 Ohm
Operating voltage
6 - 24 Volt DC
Part status - Delivery time
Orderable
Packaging
VDO Sensor retail package
Functionality
Engine oil pressure
Communication
Analog
Signal output:
10 - 184 Ohm
Sensor signal
Common ground
Sensor connector
M4 Threaded end
Thread
M14 x 1.5 Male
Connector type
M4 Threaded end
Warning contact connector
AMP Male 6.3 x 0.8 mm