VDO Pressure sender 0-25 Bar - 1/8-27 NPTF
search
  • VDO Pressure sender 0-25 Bar - 1/8-27 NPTF
  • VDO Pressure sender 0-25 Bar - 1/8-27 NPTF
  • VDO Pressure sender 0-25 Bar - 1/8-27 NPTF

VDO Pressure sender 0-25 Bar - 1/8-27 NPTF

€158.24 (tax incl.)

€130.78 tax excl.

Part-number:
VDO 360-081-053-004C
  • Pressure range: 0 to 25 Bar
  • Thread: 1/8 - 27 NPTF
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 1-pole common ground
  • Warning contact: 14.5 Bar + 1.5 Bar
Logistical information:
OrderableClick here for detailed information.
  • HS Code: 90269000
  • Ean Code: 4103590949776
  • Weight: 0.13kg
Quantity

Description transmission oil pressure sender:

VDO 360 081 053 004C Full technical specifications:

Mechanical features:

Pressure measuring range:0 - 25 Bar
0 - 362 PSI
0 - 2500 KPa
Maximum pressure:50 Bar during 2 seconds
Thread:1/8 - 27 NPTF
Length thread + nut (L1):19.5 mm
Thread length (L2):11 mm
Torque:30 Nm
Operating temperature:-25 °C to +100 °C
Pressure medium:Oil - Fuel - Air

Electrical features:

Operating voltage:6 - 24 V DC
Resistor range:10 - 184 Ohm
Pressure sensor signal:Single-Pole common ground
Warning contact:14.5 Bar + 1.5 Bar - 0.5 Bar
Warning contact switching capacity:Maximum 5 Watt non-inductive
Warning contact features:Closes with falling pressure
Pressure sender connector:M4 AMP Male 6.3 x 0.8 mm 50°
Warning contact connector:M4 AMP Male 6.3 x 0.8 mm 50°

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog:Page 123 - 125
Type of connection:B
VDO En Du Pressure senders Tables:VDO Datasheet table 6

Retail package:

  • VDO 360 081 053 004C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
VDO Continental I
360-081-053-004C

Data sheet

Category
Pressure senders
Analogue signal
10 - 184 Ohm
Operating voltage
6 - 24 Volt DC
Part status - Delivery time
Orderable
Packaging
VDO Sensor retail package
Functionality
Gear oil pressure
Communication
Analog
Signal output:
10 - 184 Ohm
Sensor signal
Common ground
Sensor connector
M4 AMP Male 6.3 x 0.8 mm
Thread
1/8" - 27 NPTF Male
Connector type
M4 Vlakstekker 6.3 x 0.8 mm
Warning contact connector
M4 AMP Male 6.3 x 0.8 mm