VDO Pressure sender 0-16 Bar - M18
search
  • VDO Pressure sender 0-16 Bar - M18
  • VDO Pressure sender 0-16 Bar - M18
  • VDO Pressure sender 0-16 Bar - M18

VDO Pressure sender 0-16 Bar - M18

Part-number:

VDO 360-081-063-003C

  • Pressure range: 0 to 16 Bar
  • Thread: M18 x 1.5
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 2-pole insulated return
  • Warning contact: 5.50 Bar ± 0.30 Bar
Logistical information:
Discontinued productClick here for detailed information.
  • Ean Code: 410359094979
  • Weight: 0.17kg
Discontinued article
Replacement article on request

Description engine oil pressure sender:

VDO 360 081 063 003C Full technical specifications:

Mechanical features:

Pressure measuring range: 0 - 16 Bar
0 - 232 PSI
0 - 1600 KPa
Maximum pressure: 40 Bar during 2 seconds
Thread: M18 x 1.5
Length thread + nut (L1): 20.5 mm
Thread length (L2): 12 mm
Torque: 100 Nm
Operating temperature: -25 °C to +100 °C
Pressure medium: Oil - Fuel - Air

Electrical features:

Operating voltage: 6 - 24 V DC
Resistor range: 10 - 184 Ohm
Pressure sensor signal: Dual-Pole insulated return
Warning contact: 5.50 Bar ± 0.30 Bar
Warning contact switching capacity: Maximum 5 Watt non-inductive
Warning contact features: Closes with falling pressure
Pressure sender connector: Bosch push-on connector 2.8x0.8mm
Warning contact connector: Bosch push-on connector 2.8x0.8mm

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog: Page 128 - 129
Type of connection: D-E
VDO En Du Pressure senders Tables: VDO Datasheet table 5

Retail package:

  • VDO 360 081 063 003C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
VDO Continental I
360-081-063-003C

Data sheet

Category
Pressure senders
Analogue signal
10 - 184 Ohm
Operating voltage
6 - 24 Volt DC
Part status - Delivery time
Discontinued product
Packaging
VDO Sensor retail package
Functionality
Engine oil pressure
Communication
Analog
Signal output:
10 - 184 Ohm
Sensor signal
Insulated return
Sensor connector
Bosch push-on connector 2.8x0.8mm
Thread
M18 x 1.5 Male
Warning contact
5.50 Bar - Normally closed
Connector type
Bosch push-on 2.8x0.8mm
Warning contact connector
Bosch push-on 2.8x0.8mm

Specific References

EAN13
410359094979