VDO Pressure sender 0-10 Bar - M14
€94.03
(tax incl.)
€77.71 tax excl.
Part-number:
VDO 360-081-030-030C
- Pressure range: 0 to 10 Bar
- Thread: M14 x 1.5
- Sender resistance range: 10 - 184 Ohm
- Sensor signal: 1-pole common ground
- Warning contact: 0.70 Bar ± 0.15 Bar
Logistical information:
- HS Code: 90269000
- Ean Code: 4103590690944
- Weight: 0.13kg
Description engine oil pressure sender:
VDO 360 081 030 030C Full technical specifications:
Mechanical features:
Pressure measuring range: | 0 - 10 Bar 0 - 145 PSI 0 - 1000 KPa |
Maximum pressure: | 30 Bar during 2 seconds |
Thread: | M14 x 1.5 |
Length thread + nut (L1): | 20.5 mm |
Thread length (L2): | 12 mm |
Torque: | 60 Nm |
Operating temperature: | -25 °C to +100 °C |
Pressure medium: | Oil - Fuel - Air |
Electrical features:
Operating voltage: | 6 - 24 V DC |
Resistor range: | 10 - 184 Ohm |
Pressure sensor signal: | Single-Pole common ground |
Warning contact: | 0.70 Bar ± 0.15 Bar |
Warning contact switching capacity: | Maximum 5 Watt non-inductive |
Warning contact features: | Closes with falling pressure |
Pressure sender connector: | M4 Plastic knurled nut |
Warning contact connector: | M4 Plastic knurled nut |
Datasheets and Tables:
VDO 2014 Vehicle Electronics Catalog: | Page 123 - 125 |
Type of connection: | A |
VDO En Du Pressure senders Tables: | VDO Datasheet table 4 |
Retail package:
- VDO 360 081 030 030C Pressure sender
- VDO Sensors are - unless otherwise noted - delivered without connecting material
360-081-030-030C
Data sheet
- Category
- Pressure senders
- Analogue signal
- 10 - 184 Ohm
- Operating voltage
- 6 - 24 Volt DC
- Part status - Delivery time
- Phased out - On request
- Packaging
- VDO Sensor retail package
- Functionality
- Engine oil pressure
- Communication
- Analog
- Signal output:
- 10 - 184 Ohm
- Sensor signal
- Common ground
- Sensor connector
- M4 Plastic knurled nut
- Thread
- M14 x 1.5 Male
- Warning contact
- 0.70 Bar - Normally closed
- Connector type
- M4 Kunststof kartelmoer
- Warning contact connector
- M4 Plastic knurled nut
- Pressure measurement range
- 0 - 10 Bar and 0 - 150 PSI