VDO Pressure sender 0-25 Bar - M10
€86.16
(tax incl.)
€71.21 tax excl.
Part-number:
VDO 360-081-037-008C
- Pressure range: 0 to 25 Bar
- Thread: M10 x 1 Conical short
- Sender resistance range: 10 - 184 Ohm
- Sensor signal: 1-pole common ground
- No warning contact
Logistical information:
- HS Code: 90269000
- Ean Code: 4103590691309
- Weight: 0.11kg
Description transmission oil pressure sender:
VDO 360 081 037 008C Full technical specifications:
Mechanical features:
Pressure measuring range: | 0 - 25 Bar 0 - 362 PSI 0 - 2500 KPa |
Maximum pressure: | 50 Bar during 2 seconds |
Thread: | M10 x 1 Tapered short |
Length thread + nut (L1): | 19.5 mm |
Thread length (L2): | 11 mm |
Torque: | 30 Nm |
Operating temperature: | -25 °C to +100 °C |
Pressure medium: | Oil - Fuel - Air |
Electrical features:
Operating voltage: | 6 - 24 V DC |
Resistor range: | 10 - 184 Ohm |
Pressure sensor signal: | Single-Pole common ground |
Warning contact: | None |
Optional warning contact: | VDO A2C59510886 Makepoint Switch |
Pressure sender connector: | M4 AMP Male 6.3 x 0.8 mm 50° |
Datasheets and Tables:
VDO 2014 Vehicle Electronics Catalog: | Page 121 - 122 |
Type of connection: | C |
VDO En Du Pressure senders Tables: | VDO Datasheet table 6 |
Retail package:
- VDO 360 081 037 008C Pressure sender
- VDO Sensors are - unless otherwise noted - delivered without connecting material
360-081-037-008C
Data sheet
- Category
- Pressure senders
- Analogue signal
- 10 - 184 Ohm
- Operating voltage
- 6 - 24 Volt DC
- Part status - Delivery time
- Orderable
- Packaging
- VDO Sensor retail package
- Functionality
- Gear oil pressure
- Communication
- Analog
- Signal output:
- 10 - 184 Ohm
- Sensor signal
- Common ground
- Sensor connector
- M4 AMP Male 6.3 x 0.8 mm
- Thread
- M10 x 1 Male tapered short
- Connector type
- M4 Vlakstekker 6.3 x 0.8 mm
- Pressure measurement range
- 0 - 25 Bar and 0 - 360 PSI