A2C59512379
| Installation (Hole) diameter and Outside diameter: | 85 mm - 3 3/8 Inch and 93 mm - 3 2/3 Inch |
| Installation depth: | 50 mm |
| Locking height with Spinlock nut: | 0.5 mm - 20 mm |
| Locking height with bracket: | 2 mm - 15 mm (Optional) |
| Flushmount: | Optional kit A2C59510864 |
| Analog speed range: | 0 to 60 Mph |
| Display functions: | Speed Odometer Voltmeter Clock |
| Sensor signal input multifunction speedo meter: | RPM Inductive sensor RPM Hall sensor RPM Blockingoscillator sensor |
| Accuracy: | ± 2.5% of full scale reading |
| Connection: | Hirschmann 8 & 14 pins MQS connector |
| Operating voltage: | 8 to 32 Volt DC |
| Current consumption: | < 175 mA including warning LED |
| Reverse polarity protection: | Yes - 1 Minutes |
| Short circuit protection: | Yes - 1 Minute |
| Deflection angle: | 240° |
| Dial colour: | White |
| Dial Illumination: | Amber LED backlight 605nm |
| Pointer: | Red LED backlight |
| Warning LED: | Red (632nm) |
| Programming: | VDO USB software kit |
| Model: | VDO ViewLine Standard |
| Lens: | Single - Anti-glare |
| Standard bezel: | Triangular chrome (Interchangeable) |
| Front protection class: | IP67 (IEC 60529) |
| Rear protection class: | IP52 |
| Relative humidity: | Maximum 95% |
| Operating temperature: | -30°C to +70°C (Chrome bezel) |
| CE standard: | Yes |
| DNV GL Certification: | Yes |
| Mechanical shock continuous: | 25G - 6ms - 1Hz |
| Mechanical single shock | 100G - 11ms |
| Free fall test: | 1 Meter - 3x |
| Housing flame retarding: | UL94-VD |
Data sheet
Specific References