VDO Pressure sender 0-10 Bar – 1/8-27 Dryseal
search
  • VDO Pressure sender 0-10 Bar – 1/8-27 Dryseal
  • VDO Pressure sender 0-10 Bar – 1/8-27 Dryseal
  • VDO Pressure sender 0-10 Bar – 1/8-27 Dryseal

VDO Pressure sender 0-10 Bar – 1/8-27 NPTF

€100.76 (tax incl.)

€83.27 tax excl.

Part-number:

VDO 360-081-039-003C

  • Pressure range: 0 to 10 Bar
  • Thread: 1/8 - 27 NPTF
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 2-pole insulated return
  • Warning contact: 0.80 Bar ± 0.15 Bar
Logistical information:
OrderableClick here for detailed information.
  • HS Code: 90269000
  • Ean Code: 4103590691415
  • Weight: 0.13kg
Quantity

Description engine oil pressure sender:

VDO 360 081 039 003C Full technical specifications:

Mechanical features:

Pressure measuring range: 0 - 10 Bar
0 - 145 PSI
0 - 1000 KPa
Maximum pressure: 30 Bar during 2 seconds
Thread: 1/8 - 27 NPTF
Length thread + nut (L1): 19.5 mm
Thread length (L2): 11 mm
Torque: 30 Nm
Operating temperature: -25 °C to +100 °C
Pressure medium: Oil - Fuel - Air

Electrical features:

Operating voltage: 6 - 24 V DC
Resistor range: 10 - 184 Ohm
Pressure sensor signal: Dual-Pole insulated return
Warning contact: 0.80 Bar ± 0.15 Bar
Warning contact switching capacity: Maximum 5 Watt non-inductive
Warning contact features: Closes with falling pressure
Pressure sender connector: M4 AMP Male 6.3 x 0.8 mm 50°
Warning contact connector: M4 AMP Male 6.3 x 0.8 mm 50°

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog: Page 128 - 129
Type of connection: B
VDO En Du Pressure senders Tables: VDO Datasheet table 4

Retail package:

  • VDO 360 081 039 003C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
VDO Continental I
360-081-039-003C

Data sheet

Category
Pressure senders
Analogue signal
10 - 184 Ohm
Operating voltage
6 - 24 Volt DC
Part status - Delivery time
Orderable
Packaging
VDO Sensor retail package
Functionality
Engine oil pressure
Communication
Analog
Signal output:
10 - 184 Ohm
Sensor signal
Insulated return
Sensor connector
M4 AMP Male 6.3 x 0.8 mm
Thread
1/8" - 27 NPTF Male
Warning contact
0.80 Bar - Normally closed
Connector type
M4 Vlakstekker 6.3 x 0.8 mm
Warning contact connector
M4 AMP Male 6.3 x 0.8 mm