VDO Druksensor 0-5 Bar - M10
search
  • VDO Druksensor 0-5 Bar - M10
  • VDO Druksensor 0-5 Bar - M10
  • VDO Druksensor 0-5 Bar - M10

VDO Druksensor 0-5 Bar - M10

€ 97,79 (incl. btw)

€ 80,82 excl. btw.

Part-number:

VDO 360-081-030-004C

  • Pressure range: 0 to 5 Bar
  • Thread: M10 x 1 Conical short
  • Sender resistance range: 10 - 184 Ohm
  • Sensor signal: 1-pole common ground
  • Warning contact: 0.70 Bar ± 0.15 Bar
Logistical information:
  • HS Code: 90269000
  • Ean Code: 4103590690821
  • Weight: 0.12kg
Aantal

Description engine oil pressure sender:

VDO 360 081 030 004C Full technical specifications:

Mechanical features:

Pressure measuring range: 0 - 5 Bar
0 - 72.5 PSI
0 - 500 KPa
Maximum pressure: 30 Bar during 2 seconds
Thread: M10 x 1 Tapered short
Length thread + nut (L1): 19.5 mm
Thread length (L2): 11 mm
Torque: 30 Nm
Operating temperature: -25 °C to +100 °C
Pressure medium: Oil - Fuel - Air

Electrical features:

Operating voltage: 6 - 24 V DC
Resistor range: 10 - 184 Ohm
Pressure sensor signal: Single-Pole common ground
Warning contact: 0.70 Bar ± 0.15 Bar
Warning contact switching capacity: Maximum 5 Watt non-inductive
Warning contact features: Closes with falling pressure
Pressure sender connector: M4 Plastic knurled nut
Warning contact connector: M4 Plastic knurled nut

Datasheets and Tables:

VDO 2014 Vehicle Electronics Catalog: Page 123 - 125
Type of connection: A
VDO En Du Pressure senders Tables: VDO Datasheet table 3

Retail package:

  • VDO 360 081 030 004C Pressure sender
  • VDO Sensors are - unless otherwise noted - delivered without connecting material
360-081-030-004C

Datasheet

Categorie
Druksensoren
Analoog signaal
10 - 184 Ohm
Voedingsspanning
6 - 24 Volt DC
Artikel status - Levertijd
Bestelbaar
Verpakking
VDO Sensor retail verpakking
Functionaliteit
Motoroliedruk
Communicatie
Analoog
Uitgangsignaal
10 - 184 Ohm
Sensor signaal
Min aan massa
Sensor connector
M4 Kunststof kartelmoer
Schroefdraad
M10 x 1 Male conisch kort
Waarschuwings contact
0.70 Bar - Normally closed
Connector type
M4 Kunststof kartelmoer
Waarschuwingscontact connector
M4 Kunststof kartelmoer
Druk meetbereik
0 - 5 Bar en 0 - 80 PSI